Home » Eye-Gaze Systems
Mounting an eye-gaze system — on a wheelchair, at a table, in bed, or on a rolling frame
An eye-gaze system is not a tablet. It is heavier, it has to sit farther from the user, and it only tracks well when it stays perfectly still. CS Mounting Systems builds Rehadapt mounts to order, so the device sits at the right distance, holds steady all day, and still lifts off — and clicks back to exactly the same spot — in seconds.
Canadian Distributor
Local support and expertise
Tablet, AAC & Eye-Gaze
Solutions for greater independence
Wheelchair Mounting Expertise
Right fit. Better positioning.
Nationwide Support
From coast to coast
Why an eye-gaze mount is never just a “tablet mount, but bigger”
Three things change when the device is controlled by the eyes — and they are the reason the mount has to be chosen differently from the start.
It sits farther away
Eye trackers need their working distance — typically an arm’s length or more — and a clear, square-on view of the user’s eyes. The arm has to reach farther out from the chair, desk or bed and hold that distance without sagging, where a tablet mount is built to bring the screen close enough to touch.
It carries more weight
An eye-gaze device — screen, eye tracker, case and often a battery — is substantially heavier than a tablet, and that weight sits at the far end of a longer arm. That is why this page leads with Rehadapt’s HD and Sturdy arms and locking joints: the light arms that suit an iPad will creep and drift under an eye-gaze load.
It must not move — yet must come off easily
Calibration is lost the moment the device shifts, so the mount has to lock rigid and stay still. At the same time it has to come off for transfers, charging and transport — and go back to exactly the same position, so the user isn’t recalibrating every time. Quick-release and indexed joints exist for precisely this.
How an eye-gaze mount is built up
Every mount — even a “standard” one — is a combination chosen for one person, one device and one chair:
Eye-gaze adapter
chosen for the exact device & eye tracker
HD / Sturdy mount arm
length & locking joints for the reach and the weight
Frame clamp or base
one of a huge range, for the exact chair, desk or bed
A position that returns
removed in seconds, back in the same spot, still calibrated
Choose where you want to mount the eye-gaze system
Pick a setting and the panel below fills in with that setting’s mounts — filtered for eye gaze, so you will only see the heavier-duty arms, stands and clamps that can hold the device far enough away, still enough, and still come off and go back on in the same place.

Recommended mounts for an iPad or tablet on a wheelchair
Wheelchair mounts clamp to the chair’s frame and hold the tablet in front of the client for communication, school or work — then swing away for transfers. The frame clamp is matched to the exact chair, so the mount fits manual and power wheelchairs alike.
A wheelchair mount holds a tablet or communication device where the client can see and reach it all day, on the chair they already use. The mount clamps to the wheelchair frame — the clamp is chosen from a huge range to fit that exact chair — and the adapter is chosen to fit that exact tablet.
Rehadapt’s design gives maximum positioning range, and swing-away arms move the tablet aside for transfers and transport without removing it.
- Best for: communication devices and tablets used out and about, at school, and at home
- Attaches with: a frame clamp matched to the chair — manual and power wheelchairs
- Good to know: the same mount can often carry a different device later, with a new adapter
Monty 3D Swing-Away Wheelchair Mount
Swings aside for transfers, returns to the same position
Wheelchair Mount with Tablet Holder
Frame-clamped, positioned for everyday communication

Recommended mounts for an iPad or tablet at a desk or table
Table mounts clamp to the edge of a desk, classroom table or tray and hold the tablet at the right height and angle for schoolwork and therapy — then come off again with no drilling and no damage to the furniture.
A table mount clamps an iPad or tablet to the edge of a desk, classroom table, work surface or tray, holding it at the right height and angle for schoolwork, therapy sessions and computer access — and it comes off again without tools or damage to the furniture.
It suits clients who use the tablet in one place, or as a second mounting point alongside a wheelchair mount, using the same adapter.
- Best for: classrooms, therapy rooms, desks and activity tables
- Attaches with: a clamp on the table edge — no drilling, no permanent fixing
- Good to know: pairs with the same tablet adapter used on the wheelchair mount

Recommended mounts for an iPad or tablet in bed
Bed mounts bring the tablet within sight and reach of someone in bed — clamped to the bed frame, or on a rolling stand at the bedside — and move aside for care and transfers. The tablet comes to the client, not the other way round.
A bed mount brings a tablet or communication device within sight and reach of someone spending long periods in bed — for communication, entertainment, or controlling their environment — positioned over or beside the bed and moved aside for care and transfers.
Depending on the room, that can be a clamp on the bed frame or a rolling stand positioned at the bedside; the clinician chooses whichever suits the client and the bed.
- Best for: hospital and home beds, recovery, and evening communication
- Attaches with: a bed-frame clamp, or a floor stand rolled to the bedside
- Good to know: positioning range matters most here — the tablet comes to the client

Recommended mounts for an iPad or tablet on a floor stand (rolling frame)
A floor stand — a rolling frame — holds the tablet without attaching to a wheelchair or furniture at all. It rolls to a comfy chair, a bedside or a standing frame, and suits chairs that cannot take a clamp or devices shared between people.
A floor stand — a rolling frame — holds a tablet or communication device without attaching to a wheelchair or furniture at all. It rolls to wherever the client is: beside a comfy chair, at the bedside, or in front of a standing frame, and rolls away again.
It is often the simplest answer when a chair cannot take a clamp, when several people share one device, or when the tablet is used in more than one room.
- Best for: comfy chairs, shared devices, and rooms where nothing can be clamped
- Attaches with: nothing — the wheeled base stands on the floor
- Good to know: “floor stand” and “rolling frame” are the same thing on this page
The same mount can suit more than one device — with limits
An arm tagged for both AAC and eye-gaze appears under both — that is not an error. But the traffic is one-way: an HD or Sturdy eye-gaze arm can carry a lighter tablet or AAC device later with a new adapter, while a light tablet arm should not be asked to carry an eye-gaze system.
- Tablet
- AAC
- Eye-gaze
- Laptop
Need help choosing an eye-gaze mount?
Tell us the eye-gaze device, and the wheelchair (or the desk, bed or chair) — we’ll quote the adapter, HD arm and clamp combination that holds it at the right distance, keeps it still, and returns to the same position.
How this page keeps both: the chooser and the AI text
The build rule for Aziz, shown on the preview so you can check it at a glance:






























































